Part 1 – "Covering the rear of the tin"

Good day!

Part 1 - "Covering the rear of the tin"

Under the motto, in a month term to cope with the "ass" - all tselulit removed, wrinkles tightened - it can be said nut: -))))
Well, to be specific, the 4 Saturday, 2 Sunday, well, even in the evenings after work days 6:. - )
Well still year and a half ago. I did not even think about this "crafts". All thanks to Oleg jigging , who advised small sink after sandblasting in places where there was proshva just zaludit. Especially compound he took in Europe ... Thank you, Oleg, that has prompted further helped link ...
Well, then, when there was a change polupopiya - decided that here it will not be superfluous ...
Long look who it is already engaged , did not have to - we have to dddd Volodya wowka26 is already an expert on all matters :-)))), and the entire range of German drugs knows. Thank you so much, not only for the triple order, but also human and moral support - and it is a couple of times, oh, how needed :-)))) Well, enough preliminaries, let's move to the point ...
Volodya brought me a set: paste for coating iron, oil to tin to the blade did not stick, and file-plane for tin (this is the photo of the second order): -)))))

Part 1 - "Covering the rear of the tin"

... you probably need to briefly tell how all these gadgets work: Pasta serves as a connector between the tin and the metal - such as our or rosin acids. But it does not contain acidic substances and it is not necessary to carry out an "antidote", after the acid. And contains no resins like rosin. Tin as usual for soldering will not work too 🙂 paste smeared on the bare metal is heated and pounded - looks like galvanized iron. After wiping lightly vlazhnovatoy cloth - is welded tin ...

Well, after that, everything seems clear need to clean up the weld and prepare iron net - I blast the ...

Part 1 - "Covering the rear of the tin"

Part 1 - "Covering the rear of the tin"

Tip number 2:
After sandblasting the metal to pass schёtkoy- grinder to surface was a rough - for better connection with tin and of course free of grease.

All this I did, and watching videos in YouTube, rushed to try ... to smear the entire cleaned surface paste and let it heat up ... Well, it's not so sweet how it shows :-)))) not treated with fire and not rubbed with a cloth, and the fifth part of the surface, I realized that there was something wrong - all dried up and did not want to melt ... I sin 50% on aging toothpaste, well, and the remaining 50% on my hands ... :-))))) I had all cleaned again, and ordered through Volodya fresh pasta and additional tin - saw that the standard set with 5 pieces, I will not go away ...

Tip number 3:
Pay attention toshelf life and do not put the paste on large surfaces at once - enough for 10 square cm ...

Part 1 - "Covering the rear of the tin"

Part 1 - "Covering the rear of the tin"

with the new paste has gone a little brighter, and I already knew how to deal with it. But anyway back of the divide by 2 times - sandblasting, paste tin ...

Part 1 - "Covering the rear of the tin"

Started with horizontal surfaces applied tin (thanks Trippers, I got enough of them) - the main point to catch :-), then catch the pleasure; -)))))

Part 1 - "Covering the rear of the tin"

Part 1 - "Covering the rear of the tin"

well, then a file - planed as a good board without knots - the soul sings! Well, the main thing is not to overdo it! I'm open - once carried away :-))) But in the future, even lining learned to do - add tin ...

Part 1 - "Covering the rear of the tin"

Part 1 - "Covering the rear of the tin"

Next grinding 80koy or 100koy. It was after her and found a couple of small towns, where the tin "regretted" - but could report ...

Tip number 4:
Not Please save the tin - it sberegёt your time and nerves. Better more polzhit and chips as possible and reuse. As my dad could not move, she'll throw - melted: -))))

Part 1 - "Covering the rear of the tin"

Part 1 - "Covering the rear of the tin"

Part 1 - "Covering the rear of the tin"

Part 1 - "Covering the rear of the tin"

the second polovone already on vertical ploskastyah podnataskal even tin almost did not fall 🙂

Part 1 - "Covering the rear of the tin"

After a complete stripping of course there are the shells and small dimples, but this is not terrible - shpaklya lies not onmetal ...

Part 1 - "Covering the rear of the tin"

Part 1 - "Covering the rear of the tin"

Part 1 - "Covering the rear of the tin"

Well and again ground: -)))

Part 1 - "Covering the rear of the tin"

I wanted to tell a few more nuances, but at the time it can not be described - and so took a lot of time. I wanted a couple of pictures to show, but does not include more ...
Though another BZ write ...
But another tip with your permission I will give

Tip Number 1 - main:!
Kohl have decided that -What do, do - and good advice is always to help the guys with DDD!

Thank You who read! Good luck to all and good luck

Everyone who celebrates this weekend Christmas - Happy

!

No Comments Yet.

Leave a comment