Thermostat

Hello! A few days ago, when it came to driving to work that morning, in the parking lot saw some steam from under the hood, but because the street was still dark, then under the hood, I saw nothing, just a little bit of steam, and the temperature was normal - well thought you never know what went through the puddles, that evaporates the water got on the radiator. At lunchtime I opened the hood, and even at daylight I saw that on the motor and the spray coolant expansion bachek was empty ((Without consequences reached the garage, poured some water that saw a trickle of running out of the thermostat housing. Removing the thermostat took about 15 minutes with anti-freeze is not particularly ceremony because still changing, so what that part was spilled on the floor. When removed the thermostat saw that broke a piece of the body from the inside, it is good that this piece entangled in the thermostat spring and did not get into the channels of the cooling jacket, and all of you ... it broken off?!

Put an analogue company wahler, it comes with a temperature sensor. Old, yet the native firms thermostat MANN

and a new

when installing the sealant did not use! At the same time checked whether the fan works, this when the ignition is necessary to remove the terminal of the temperature sensor - have earned me. After this will error on the sensor, can burn a check in the computer memory! After changing a little differently began to show the temperature of the arrow, now in traffic junction temperature mark 90. ​​Antifreeze filled this

206 Sedan, 206 Sedan (2005), Peugeot

January 3, 2017

userauto

No comments

423

0

independent repair