My story about the handbrake

My story about the handbrake

Hello everyone. Not so long ago, I tried to adjust the handbrake summing blocks, duck's not for long enough stretch and was very heavy. So I decided to order a new parking brake cables, first ordered one cable company onnuri GCBG-030, The exist offered it as an analogue. Duck here my friends, do not order a cable from this company, they are not suitable, under the rope drum brake. Therefore I ordered the company PMC PTD-003 and PTD-004 to drive them have someone take. Well, after the replacement, I did not feel the difference, the old cable were normal. Well, here holding my head I began to examine the brake device and found that the owner before me too dragged stretch rope on the service, and a spring freewheel too compressed. I threw the discs and dismantled a mechanism dirt there was not as many at her find I do not know. In general, washed, I replaced the grease. Then he loosened the rope to complete relaxation rope spring. Divorced pads and re-assembled.
And lastly I want to say that do not touch at all the nut tensioning cables, do not be lazy to throw off the brake discs. Yes, time will take longer, but the layout of pads will be much more correct than the lift cables. For 2 years and 37000 cable are not tired. I think that many of them are changing and I do not control zanimayuisya. I hope that my handbrake after that lasts a long time, well, a maximum reconnoiter new pads. However, do not judge strictly, I want to go all the way to solve the ills myself!

No Comments Yet.

Leave a comment