oil leak with automatic plug 4st

oil leak with automatic plug 4st

decided to immediately write on this topic, suddenly someone will need)) will try to write easy to understand, since nowhere have I found about it, but the problem with that I think is at all, box automatic 4st, did everything myself at your own risk, for this need 2 large rubber rings and 1 small and the stopper (stopper can leave old), number of rings if you need to write, so I do not remember. at first glance it seems that it is necessary to remove the silencer, but I did not do it, and with the automatic transmission oil is not discharged,. Unscrew the ski on which there is automatic 8 screws and 2 nuts, unscrew the rear propeller of razdatki 4 bolts, and all! priopuskaem automatic transmission, well, there is one which hands remove the stopper (will pour a little oil) and change the ring during assembly back spring that will push the mechanism (it's inside will) to put exactly in the center (I did not notice it the first time and the assembly obviously she fell, were horrible foam and knock automatic transmission seems valve did not create pressure oil, as spring was lying by itself, then when the second time to get useful and put everything as it should be and automatic transmission earned as it was, without any knocks and jerks) so be careful and do not repeat my mistakes.
A small tip!
1) on the stopper, you will not see the tabs for that can be walked on and pull out, pull out the stopper should be on the right side, there is a small propyl to a stopper and you can use a screwdriver to his podkovyrnut and pull out (for the convenience of push cap automatic transmission, can be montazhku that she drowned herself into a bit of it for easy removal of the locking ring. I marked in the image where the arrow propyl.

No Comments Yet.

Leave a comment