# 48 On the way to the cabin STIlnomu

Staff salon every day left a lot to be desired. The driver's seat is a bit shabby, rear sofa has started on a line break (but not critical). It was decided to go / buy more fresh compartment or other interior, another body. After much thought, decided to still stay at the cabin from SG9 STI.

# 48 On the way to the cabin STIlnomu

# 48 On the way to the cabin STIlnomu

Before this, all thought the cabin from GDA body, but it is not quite like the front seats, and the rear bed is not so comfortable, like SG9. Big difference there is in fact a semi-bucket SG9 which there series and SG9 STI, found only in the material itself and the inscription STI. If wrong, please correct!)
Oh well. After a day off, decided to take up the mess back sofa because to bolt, he does not get up.

# 48 On the way to the cabin STIlnomu

At least have to look at Shumkov mounting holes for runners.

# 48 On the way to the cabin STIlnomu

# 48 On the way to the cabin STIlnomu

# 48 On the way to the cabin STIlnomu

Of course without the help of antoha-zlobin and semiautomatic not done. Actually absolutely nothing complicated. The most interesting moment. carefully weld the 2 bolts on the body, on the edges of the slide area and make the support in the middle of the couch.

# 48 On the way to the cabin STIlnomu

# 48 On the way to the cabin STIlnomu

# 48 On the way to the cabin STIlnomu

After provarivaniya bolt to body, walked the ground for provarivaniya, then black paint.

# 48 On the way to the cabin STIlnomu

# 48 On the way to the cabin STIlnomu

One of the slides was a bit behavior, had a bit of her rihtanut

# 48 On the way to the cabin STIlnomu

now remains for small. Make fasteners / Area between slides, for fixing each half to the body and clean / podremontirovat back sofa material.

# 48 On the way to the cabin STIlnomu

All good and good luck on the road!

No Comments Yet.

Leave a comment