Again, the front propeller

A week ago, evacuated with taiga two people (go rafting on a mountain river, broke one of the boats and the other broke an oar on the room) and I noticed that when in the lowered start movement in the interference, then there is not sickly vibration and light stuchok . After a cursory inspection revealed that ended splined on the front cardan. Dogo was thinking what to do, either buy a contract (which in the afternoon with fire you will not find) or scald itself mother cardan circle of metal precipitate to select play. But he decided to first try to change the very mother. I rummaged in the catalog and found that half of the front and from the flange fit ryadya Toyotas such as the Prado 78, 90, Surf 130, 185. At a friend in the garage just lay cardan from Pradika 95 back, and he kindly gave me half.

Again, the front propeller

Already trimmed to length
but it is a bit longer than necessary, but nebeda (it's not shorter) took on the grinders drove right, cut about 3 cm. The edges of the processed natfilem and examples. The village is pretty tight, first posted the wheels then clamped suspension, everything is fine nothing falls out and bites.

Again, the front propeller

On rightful place
Proshpritseval and picked up a duster on the rack of some cars. After passing, the vibration is gone.
also decided to climb up to look rear brake pads. And on the left side saw oil painting.

Again, the front propeller

Painting with oil)))
it can be seen that the gland mokrel long time, but it flowed not long ago, had the benefit of a new stock. Case 30 minutes and voila.

Again, the front propeller

.
The new grease filled bearing.

Again, the front propeller

.
At the same time, and pads waved, and then lie gathering dust)))
Well, here's all.


No Comments Yet.

Leave a comment