Toyota Hilux Line-X photo

In general, I decided to cover the Line-X and made him, as he wrote earlier. . I will describe how to choose, why, well, a little bit about the process and the result of
The main question perhaps - why
For the first time I saw this cover on the tundra DEVOLRO. I liked very much, did not know yet that can be applied to the coating on any machine. I started reading, and I realized that it is necessary to me. Since you can forget about:
- chipped
- scratch
- small lapping
What it is important for a pickup. Since the forest ride was simply pathetic. then branch bush out there, and so on. And on the road who goes probably remembers what becomes of the bonnet and bumper for a year or two.
How to choose?
There is all sorts of surfaces. Why I chose Line-X, rather than the Raptor for example? I answer. Raptor - it's only a polymer coating, and Line-X - is a polyurea. That is to compare them all wrong. Yes, outwardly it looks the same, but everything else - from the structure, method of application and strength differs greatly. In other matters as well as the price tag. Polyurea and so, in contrast to polyurethane coating alone can not cause a brush or roller.

Coated decided it is time to look for performers. Created then post on the drive - Search Line-X , but eventually found by Google representative of Line-X in St. Petersburg. This Truck Garage (trkge.ru). I went to the guys and talked. I decide on the color - it was graphite. I decided to cover the entire machine completely, including the inside of the load compartment and the cover.
It took about a week. The car took off shields, glass, hood, bumper, handles, running boards, cargo compartment, the cover of the body and so on.

Toyota Hilux Line-X photo

The machine then matovalas, and then applied to already coated Line-X.
The result can be seen on the photo (just a sink left).

Toyota Hilux Line-X photo

Toyota Hilux Line-X photo

Toyota Hilux Line-X photo

Toyota Hilux Line-X photo

Toyota Hilux Line-X photo

way to cover also the so-sticks dirt, as usual ink, and fat from the body does not need. And there is still "dry" it is not necessary to wash - just poured, and then she dries:)
Cover Body field coating became stronger, not as it is already reeling from side to side when opened. And on the back of this coating layer is also beneficial impact on noise reduction (which, by the way I did that already, who are interested to see: here .
The whole machine in such a coating looks brutal, and it is now coming . for their tasks is not afraid to mechanical damage, trips into the forest, stones, and other bad things:)

No Comments Yet.

Leave a comment