Cap. suspension repairs

I decided to do a little suspension. Behind to the existing spacers (3 cm) under spring Musso Sports added a spacer of aluminum 3 cm sostakoval it with a rubber spacer through the screws. Also extended the bumpers on the elevator-size (6 cm), shock absorbers are the same from 5000 Rancho Trupera. Looked - reserve of shock absorbers down 5 cm normally think as the blank, I do not ride. Springs incidentally almost slipped, and the goods very well kept for 2 years.
With front suspension too full kapitalka - replacement of all ball, replacing silent blocks of the lower arm, upper arms, I put the new ones in the last year and I think that there is nothing they will not be, strengthening the lower arm and shock absorbers perevarka bracket, trim chipper frame (undercut angle of impingement because when diagonalke ammortizator hurt him), replacing the needle bearing in the steering knuckle, replacement of seals on the drive and the fist, replaced napravlyashki calipers and about this bryakanie got. The rest is all perfect).

Cap. suspension repairs

seals and drive bearings

Cap. suspension repairs

clipped corner bump. then brewed hole semiautomatic

Cap. suspension repairs

scalded arm completely. Now there is no fear that bend or break

in the plans at the end of Shumka salon week)

No Comments Yet.

Leave a comment